Contact details +6469519033
Dr Mark Tunnicliffe BE(Hons), PhD
Senior Lecturer
Doctoral Supervisor Engineering GroupProfessional
Qualifications
- Bachelor of Engineering (Honours) - University of Canterbury (1987)
- Doctor of Philosophy - University of Canterbury (1992)
Certifications and Registrations
- Licence, Supervisor, Massey University
Research Outputs
Journal
Brown, N., & Tunnicliffe, M. (2022). Strategies for teaching idea generation for project-based learning and adapting these approaches to an on-line environment. Global Journal of Engineering Education. 24(1), 28-33
[Journal article]Authored by: Brown, N., Tunnicliffe, M.
[Journal article]Authored by: Brown, N., Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
3
Perera Halnetti, AD., Jayamaha, N., Grigg, NP., & Tunnicliffe, M. (2024). Lean six sigma through an Australasian lens: project definition, structure and practices. International Journal of Lean Six Sigma. 15(3), 541-566
[Journal article]Authored by: Jayamaha, N., Tunnicliffe, M.Contributed to by: Jayamaha, N.
[Journal article]Authored by: Jayamaha, N., Tunnicliffe, M.Contributed to by: Jayamaha, N.
Perera, AD., Jayamaha, NP., Grigg, NP., Tunnicliffe, M., & Singh, A. (2021). The application of machine learning to consolidate critical success factors of lean six sigma. IEEE Access. 9, 112411-112424
[Journal article]Authored by: Jayamaha, N., Tunnicliffe, M.
[Journal article]Authored by: Jayamaha, N., Tunnicliffe, M.
Vekris, EW., Smith, RW., Tunnicliffe, MC., & Campbell, G. (1997). Use of the ZARM drop tower to study solidification in undercooled liquid metals. Microgravity Science and Technology. 10(4), 178-186
[Journal article]Authored by: Tunnicliffe, M.
[Journal article]Authored by: Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
1
1
Tunnicliffe, MC., Kaya, M., Gallerneault, WM., Smith, RW., & Campbell, G. (1996). Liquid metal processing using the drop tower at ZARM, Bremen, Germany. Materials Science Forum. 215-216, 89-94
[Journal article]Authored by: Tunnicliffe, M.
[Journal article]Authored by: Tunnicliffe, M.
Book
Anderson, AM. (Ed.) (2017). Product Development and Management Body of Knowledge: A Guidebook for Training and Certification.
[Edited Book]Contributed to by: Tunnicliffe, M.
[Edited Book]Contributed to by: Tunnicliffe, M.
Thesis
Tunnicliffe, MC. (1991). The fracture toughness of low carbon steels: the effects of grain size and temperature.. (Doctoral Thesis)
[Doctoral Thesis]Authored by: Tunnicliffe, M.
[Doctoral Thesis]Authored by: Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Conference
Tunnicliffe, M., Brown, N., & Shekar, A. (2021). Rapid Learning Cycles for project-based learning. 9th Research in Engineering Education Symposium and 32nd Australasian Association for Engineering Education Conference, REES AAEE 2021: Engineering Education Research Capability Development. Vol. 2 (pp. 595 - 604).
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Brown, N., & Tunnicliffe, M. (2021). Development of and reflection on introducing a pass/fail course for first-year engineering students. 9th Research in Engineering Education Symposium and 32nd Australasian Association for Engineering Education Conference, REES AAEE 2021: Engineering Education Research Capability Development. Vol. 1 (pp. 103 - 110).
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Huang, H., Tunnicliffe, MC., Shim, YM., & Bronlund, JE.Development of fruit simulators for postharvest cold chain optimization. Refrigeration Science and Technology. (pp. 3194 - 3201). 0151-1637.
[Conference]Authored by: Bronlund, J., Tunnicliffe, M.
[Conference]Authored by: Bronlund, J., Tunnicliffe, M.
Perera, A., Jayamaha, N., Grigg, N., & Tunnicliffe, M.Theorizing And Testing The Underpinnings Of Lean Six Sigma. . Melbourne. Australia
[Conference Paper]Authored by: Jayamaha, N., Tunnicliffe, M.
[Conference Paper]Authored by: Jayamaha, N., Tunnicliffe, M.
Alsallal, S., Tunnicliffe, M., & Avci, E. (2018). Non-Destructive Evaluation of Soft Body Armour Condition using Fourier Transform Infrared Spectroscopy. International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz. Vol. 2018-September
[Conference Paper in Published Proceedings]Authored by: Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Tunnicliffe, M.
Huang, H., Tunnicliffe, M., Shim, YM., & Bronlund, JE. (2017). Model based development of fruit simulators. AIP Conference Proceedings. Vol. 1896
[Conference Paper in Published Proceedings]Authored by: Bronlund, J., Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Bronlund, J., Tunnicliffe, M.
Brown, N., & Tunnicliffe, M. (2017). Staff competencies/capabilities required and challenges faced when delivering project based learning courses. 28th Annual Conference of the Australasian Association for Engineering Education (AAEE 2017) order of proceedings. (pp. 696 - 705). : 28th Australasian Association for Engineering Education
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Tunnicliffe, M., & Brown, N. (2017). Evaluation of a redesigned Engineering degree founded on project based learning. In N. Huda, D. Inglis, N. Tse, & G. Town (Eds.) Proceedings of the 28th Annual Conference of the Australasian Association for Engineering Education (AAEE 2017). (pp. 503 - 511). Sydney, Australia: 28th Annual Conference of the Australasian Association for Engineering Education (AAEE 2017)
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Brown, N., Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Shekar, A., & Tunnicliffe, MC. (2017). An introductory course with a humanitarian engineering context. In R. Brennan, K. Edstrom, R. Hugo, J. Rosslof, R. Songer, & D. Spooner (Eds.) Proceedings of the 13th International CDIO Conference. (pp. 137 - 148). Calgary, Canada: 13th International CDIO Conference
[Conference Paper in Published Proceedings]Authored by: Tunnicliffe, M.
[Conference Paper in Published Proceedings]Authored by: Tunnicliffe, M.
Smith, RW., Zhu, X., Tunnicliffe, MC., Smith, TJN., Misener, L., & Adamson, J.The measurement of precise solute diffusion coefficients in dilute liquid metals and metalloids in a low earth orbiting laboratory - the influence of g-jitter. European Space Agency, (Special Publication) ESA SP.
(454 II)(pp. 887 - 893). 0379-6566.
[Conference]Authored by: Tunnicliffe, M.
[Conference]Authored by: Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
9
2
Smith, RW., Zhu, X., Tunnicliffe, MC., Russell, CL., & Gallerneault, WMT.The capture of suspended particles as a crystallising phase advances into its melt - the influence of reduced gravity, the ambient g-jitter of MIR and forced motion on particle pushing. European Space Agency, (Special Publication) ESA SP.
(454 II)(pp. 613 - 620). 0379-6566.
[Conference]Authored by: Tunnicliffe, M.
[Conference]Authored by: Tunnicliffe, M.
Read Abstract: ![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
![abstract icon](/massey/app_templates/_pagetemplates/pagelets/academic_outputs/images/abstract.jpg)
Smith, RW., Gallerneault, WM., Tunnicliffe, MC., Berndt, R., Smith, TJN., Misener, L., . . . Marrone, J.(1998). The QUELD II MIR materials processing facility. Paper presented at the meeting of 1998 proceedings: 10th International Symposium on Experimental Methods Materials Science. San Anronio, Texas, USA
[Conference Paper]Authored by: Tunnicliffe, M.
[Conference Paper]Authored by: Tunnicliffe, M.
Teaching and Supervision
Summary of Doctoral Supervision
Position | Current | Completed |
---|---|---|
Co-supervisor | 1 | 3 |
Current Doctoral Supervision
Co-supervisor of:
-
Nyasha Makaza
-
Doctor of Philosophy
Developing a motile, absorbent wall material for invitro intestinal simulators.
Completed Doctoral Supervision
Co-supervisor of:
-
2024
-
Achinthya Halnetti Perera
-
Doctor of Philosophy
Theorising and Testing the Underpinnings of Lean Six Sigma -
2022
-
Huijian Huang
-
Doctor of Philosophy
A systematic approach of develop and manufacture fruit simulators -
2021
-
Michael Horrell
-
Doctor of Philosophy
Integration of eco-design into product development practice; applied in the design and manufacture of shower and tapware products